How to Update Galaxy S7 SM-G930F (Exynos) to 6.0.1 Marshmallow OTA

Tagged: Official ROM, SamFirm, Samsung

This topic has 0 replies, 1 voice, and was last updated 7 years, 10 months ago by Linux User.

Viewing 1 post (of 1 total)

Author
Posts
June 14, 2016 at 4:49 PM #4031
Linux User
Participant
Samsung Galaxy S7 SM-G930F devices are getting official Android 6.0.1 Marshmallow update version G930FXXU1APEQ. Here is a very simple Step By Step guide to update the G930FXXU1APEQ 6.0.1 Marshmallow Update Manually on the Samsung Galaxy S7 SM-G930F (Exynos). Just grab the Firmware update using the SamFirm utility as explained in the below section and then follow the manual OTA update process to get the latest update.
DISCLAIMER:
Manually updating the firmware will WIPE EVERYTHING on your phone. Make sure you do a backup using a synchronization application or using Samsung Smart Switch or if you have TWRP installed then you can take a NANDROID backup using the TWRP itself. I am not at all responsible if anything happens to your phone as a consequence of following this guide but I can assure you that I will help you as far as possible to get you out of the problem (if something happens).

REQUIRED DOWNLOADS AND RELEVANT LINKS TO UPDATE Samsung Galaxy S7 SM-G930F (Exynos) MARSHMALLOW OTA G930FXXU1APEQ:
- Samsung USB drivers
- Samsung Odin Download
- Stock Samsung Firmware Image.
  – Here you go to Download Stock Samsung Firmware easily and Quickly Using SamFirm.
- Samsung Stock Firmware Flashing guide Using ODIN.
If required:
– 15 Seconds ADB Installer for Windows
– Minimal ADB and Fastboot for Windows
ADB Fastboot Installation guide for Linux and MAC
INSTALLING THE Samsung Galaxy S7 SM-G930F (Exynos) G930FXXU1APEQ Android 6.0.1 MARSHMALLOW UPDATE:
1. Download and install the Samsung drivers for your phone.
2. Download and install the ODIN application on your PC before proceeding further.
3. Take backup using a synchronization application or using Samsung Smart Switch or if you have TWRP installed then you can take a NANDROID backup using the TWRP itself.
4. Download the latest Marshmallow OTA update from Samsung Servers using the SamFirm Firmware Samsung Stock Firmware download utility using the following guide:
  – Here I have compiled a guide explaining How To Download Stock Samsung Firmware easily and Quickly Using SamFirm.
5. After downloading the OTA update install the stock OTA update using the ODIN application using the following guide:
  – Here is the Samsung Stock Firmware Flashing guide Using ODIN.
DONE!!! Your phone will now be booting into the Latest Samsung Galaxy S7 SM-G930F (Exynos) Android 6.0.1 MARSHMALLOW Update. If you have any concerns while following this update then just login to comment. Till the next update just stay tuned.
Author
Posts