[NOUGAT] Jiayu S3 Plus Nougat ROM (7.0, AOSP)

GCam Port | Google Camera APK v9.2 (March 2024) Forums Jiayu Device Forums S3 Plus – n560a [NOUGAT] Jiayu S3 Plus Nougat ROM (7.0, AOSP)

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #5980
    Linux User
    Participant

    Jiayu S3 Plus Nougat ROM 7.0 AOSP is an UNOFFICIAL Android Nougat build for Jiayu S3 Plus (device codename: n560a). This jiayu S3 plus Nougat ROM (7.0 AOSP) is brought to you by developer fire855 and karthick111. This is an ALPHA status ROM which means there are still many things broken on this ROM and hence it is strongly recommended that you take either a NANDROID backup or a complete sync of your phone data.

    THIS IS JUST AN ALPHA ROM AND CANNOT BE USED AS A DAILY DRIVER SOFTWARE. CHECK THE WORKING AND NON-WORKING LIST BEFORE FLASHING AND PROCEED AT YOUR OWN RISK.

    DISCLAIMER:
    Installing custom ROM requires a custom recovery to be installed on your device, which in-turn may require the bootloader to be unlocked which may VOID your warranty and may delete all your data. Before proceeding further you may consider backup your all data. You are the only person making changes on your phone and neither we nor the developer can be held responsible for the mistakes done by YOU.

     

    Status of fire855’s Jiayu S3 Plus Nougat ROM:

    WHAT’S WORKING:
    – Audio
    – Wi-Fi
    – Bluetooth
    – Network (Calls, SMS, Mobile Datal)
    – Sensors (accelerometer,compass,light,proximity)
    – Light
    KNOWN ISSUES:
    – You need to disable the adaptive brightness to use the brightness slider
    – Camera
    – GPS
    – Hardware encoding/decoding

     

    JIAYU S3 PLUS NOUGAT ROM (7.0, AOSP CUSTOM ROM) INSTALLATION

    REQUIRED DOWNLOADS AND GUIDES FOR JIAYU S3 PLUS NOUGAT ROM (7.0, AOSP ROM) FLASHING:

    Make sure you have a Linux/Windows PC or a MAC installed with Fastboot and adb binaries. If not then you can follow one of the following guides based on your PC OS:
    15 Seconds ADB Installer for Windows
    Minimal ADB and Fastboot for Windows
    ADB Fastboot Installation guide for Linux or MAC

     

    JIAYU S3 PLUS NOUGAT ROM (7.0, AOSP ROM) INSTALLATION GUIDE:

    Make sure that you have unlocked the bootloader and installed a custom recovery on your Jiayu S3 Plus (device codename: n560a). If not then you can try this generic Bootloader unlock guide for any Android device.
     

    For recovery installation you can download the TWRP from above download link and follow this guide: How to install recovery on a Mediatek device.

      • Download the Jiayu S3 Plus Nougat ROM zip file and a suitable Nougat Gapps zip file from the above download link and copy both the files to phone.
      • Boot into Recovery by one of the following method:
        – Power off the phone and keep pressing key combinations to enter into recovery.
        – If you have enabled USB debugging and you have ADB utility installed on your PC then you can execute the following command on a console or command prompt:

        adb reboot recovery
      • Wipe data factory reset, Cache partition, Dalvik Cache and Format the System partition using the recovery.
        – Here is a guide explaining how to wipe data using TWRP recovery.

        This will delete all your data on your phone. IGNORE IF YOU DON’T WANT TO OR IF YOU HAVE ALREADY DONE THIS. You may consider complete backup of your phone data or take a NANDROID backup of the current ROM.
        How to backup all data on your Android Device.
        how to take NANDROID backup using TWRP recovery.

      • First flash the Jiayu S3 Plus Nougat ROM ZIP from device.
        – Here is a post explaining how to flash a custom ROM using TWRP recovery.
      • Now flash the Google Apps package.
        – Here is a post explaining how to flash GApps using TWRP recovery.
    1. Upgrading from earlier version of Nougat 7.0 AOSP ROM on Jiayu S3 Plus:

      • Copy the Jiayu S3 Plus Nougat ROM ZIP file to your phone.
      • Boot into Recovery.
      • Flash the latest Jiayu S3 Plus Nougat ROM ZIP from your phone.
        – Here is a post explaining how to flash a custom ROM using TWRP recovery.
      • Reboot your phone. If your GApps are removed after the flashing then follow the next step.
      • After that flash the Google Apps package.
        – Here is a post explaining how to flash GApps using TWRP recovery.

    Reboot your phone, Complete the initial setup and enjoy Android Nougat 7.0 AOSP on Jiayu S3 Plus. For any concerns or bugs on this guide or this ROM, just login and place your comment to get an instant help.

    Here is a Jiayu S3 Plus CyanogenMod 13 ROM. If you are interested to try then you can have a look on that.

    Stay tuned or Subscribe to the Jiayu S3 Plus forum For other Android Nougat ROMs, CyanogenMod 14 ROMs, other ROMs and all other device specific topics.

     

    Here is the development thread for Jiayu S3 Plus Nougat ROM.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.